Specifications

will appear next to it. 13. If the word reads "none" then forget the whole thing, as you are
already region free... if there's a number there then that is the region your unit is using. 14.
Press "ok" on the remote to change the region. 15. Use the down button [directly under the
"ok" button on the remote] to
scroll down the list. 16. Select the word "none" to make your unit region free. 17. The warning
you see is probably meant to do nothing more than frighten you, I don't think you can damage
your player by altering this since it's only altering region codes , which have nothing to do with
anything vital to the unit. [no worse than changing TV channels really]. 18. press "i" to end.
I'm in Australia and bought my player locally, so it appears that this probably works on all
xenaro players.
Grundig Xenaro GDP 6150
1. Get into the Service Menu. This is not intended for home users, only for service technicians.
Therefore you're asked for an access code, it is 8500 for all Xenaro DVD Players. 2. Activate
"System Messages" using the Service Menu. 3. Leave the Service Menu and get into the
"System Informations" Menu. 4. When you see the System Infos, enter the following code on
the remote control. Note that the player will not print the code on the screen, you have to enter
it blindly. The code is: 70307192 (This is the one that differs from the 5100 model.) 5. A
system message should appear. It will not appear if you got the code wrong or if you did not
activate system messages in the service menu. Confirm the message with OK on your remote.
6. Now a window appears in which you can change your region code. Values 1 to 8 and "none"
are possible. "none" will disable the internal check of region codes (i.e. makes the player
CodeFree), but RCE titles might not work. This doesn't really matter, as you can change the
code as often as you wish to match a specific disc. 7. If you want to, you can disable System
Messages again using the Service Menu after you changed the code.
Grunkel DVG-20NT
With the disc out and on press, SETUP, STOP, |<<, >>|
Haier HD700
See http://www.nerd-out.com/darrenk/ for instructions
Harman Kardon DVD1
Region code hack: With no DVD inserted put the player into STANDBY and on the remote press
3141592 and then number for region.
Harman Kardon DVD10
Player off, without DVD. Wait till "NO DISC". With the remote put in ....3141592. now the
Region code (1-4). now you must see on the display "Power on.
Harman Kardon DVD20
Same as above
Harman Chardon DVD25
Same as above
Harman Kardon DVD5
Same as above