Specifications

Same as above

Grundig GDV 620HT

Turn the machine on and open up the DVD tray. Using the remote control press 9817. Change

the region to whatever you want or set it to 9 which is Multiregion, press the enter button.

Power on, and open drawer. Key in 3838 with handset. A menu will appear,"Region Code",and

"Macro On/Off". Region code can be set by pressing Enter key repeatedly to get desired region,

and Macro, on the line below, can be accessed with the "down" button to be turned off if you

wish to tape any DVD's. Press Open/Close button to store.

Grundig GDVD 100d

1. Press Play on the remote, followed by 2, 7 and 4. 2. When the display reads '___ ____' enter

005 000 128 156 using the remote. 3. Press Play on the remote. Your player is now a region 1

only player. To return it to region 2 only do the following: 1. Press Play on the remote, followed

by 2, 7 and 4. 2. When the display reads '___ ____' enter 002 000 128 156 using the

remote. 3. Press Play on the remote. Your player is now a region 2 only player. To reset the

machine to factory defaults, do the following: 1. Press Play on the remote, followed by 1, 5 and

9. 2. When the display reads '___ ____' enter 004 001 000 140 using the remote. 3. Press Play

on the remote.

Grundig GDV-130

Press the Open button on the Remote Control

Then press Setup

Press the 9 button on the Remote Region Free, or 1 for Region 1, 2 for Region 2, and so on

Press the buttons 2, 0, 0 and then 0 on the Remote

Then press Step, Shuffle, and the Next button

Grundig GDV-200

Open the DVD Player CD Tray

Place a Region 1 disc in the tray, but don't close it

Press the buttons 0, 1, 2 and then 3 on the Remote Control in order, one at a time

Press the Play button on either the Remote or the player

To change the player back to Region 2 only functionality:

Open the DVD player CD tray

Place a Region 2 disc in the tray, but don't close it

Press the buttons Return and then Play on the Remote Control in order, one at a time

Grundig GDV-210