Specifications

Code 2
Turn the player on and ensure there is no disc in the tray
From the Remote Control key in 0, 0 and Clear, for Region Free operation
0, 0, 1 for Region 1
0, 0, 2 for Region 2 and so on
Gradiente D-22
Put the player into standby. Press 0, 0. For region 1 press '1'. For region 2 press '2'. For any
other region press the corresponding key on the remote.
Gradiente DVD-5000
Code 1
Same as above
Code 2
Changing to Region 1
Turn on the power
Verify the region code by pressing '00' and '+10'
Turn player on standby
Press '00' and the region code you want
(you can't select Region 0)
Verify the region code again by pressing '00' and '+10'
Changing to Region 2
Repeat steps one to 5, changing the code at step 4.
Gradiente DVD-6500
1 - Turn on your DVD 2 - Press 0 0 CLEAR 3 - An "AUTO" message will appear on TV
Gradiente DVD-6500 HT
Turn on the DVD player
Press 0, 0, CLEAR
An "AUTO" message will appear on TV
The player is now region free
Gradiente K-30
Ensure there is no disc in the players tray
Key in on the Remote Control 0, 0 and then Clear
You should see a message "AUTO" appear indicating that the machine is Region free
Grundig GDV 110, 130
Open your DVD-drive, and press this on your Remote: SETUP - 9 - 2 - 0 - 0 - 0 - STEP -
SCHUFFLE – NEXT
Macrovision off: SETUP-STOP-TITLE-PREV-SETUP Set this, while disk is running, stays like
that until player is set into standby mode.
Grundig GDV 200
Open the tray. Insert region 1 disc. Do not close the tray. Press 0,1,2,3 on the remote. Press
Play.
Grundig GDV 210
Same as above
Grundig GDV 212