Specifications

Dansai DVD852S
Turn on the DVD player, with no cd in the player. Press 'set-up' on the remote. Press 'stop' on
the DVD player. Pres 'Prev' on the player (top button). Press 'next' on the player (bottom
button). In this menu you can set 'region' and turn on or off the marcovision
Dantax DVD1000
Code 1
Open slide. On remote control, push 9926. On remote control, push 0 Close slide. Turn power
off, and turn power on again after approx. 1 minute The DVD player will now recognize all
regions.
Code 2
Open the players tray
On the Remote Control, key in 9, 9, 2, 6
Then press 0
Close the DVD Player tray
Turn the power off, and turn power on again after approx. 1 minute
The DVD player will now recognise DVD from any region
If you have problems with the above, or problems with RCE discs try:
Replace 9, 9, 2, 6, with 8, 9, 2, 6
Dantax DVD1500
Open the cd tray, Type 9999x, where x is the region. Close the cd tray.
Dantax DVD450
Eject disc, Press 7 7 select on remote. This will bring up a secret menu. You can choose the
region (13 all region). You can disable macrovision.
Denver DVD-122
Open the DVD door by pressing the 'open' button on the remote. Press 33080 with the number
pad on the remote. Press PLAY on the remote, and the DVD door will close.
Denver DVD-311
Power on the unit and open the DVD door by pressing the "OPEN" button on the front panel -
Press SETUP - Use the Remote Control to enter the following numbers 3,3,0,8,8 - U will see in
the top left of the screen "****" appear - Key in a number corresponding to the Region you
desire your player to be set to, use 0 for Region free.
Denver DVD-321
Same as above
Denver JVD200
Same as above
Denver DVD-121
Press Open. Press 3 then 3 then 0 then 8 then 8 then 0. Press Play.
Diamond 101
Open tray, Press 9999 on remote, Press OK, Press 9 = All code, 4 = Zone 4, 3 = Zone 3.
Diamond DVD-201D