Specifications

player.
Daewoo DVG-4000S
EJECT, SETUP, STOP, I<< (PREV), >>I (NEXT) "FACTORY CONTROL PAGE" Menu will appear
on the Screen. MOVE to REGION CODE with DIRECTION Button in the Remote Control and
press PLAY. Press SETUP.
Daewoo DVG-5000D
Turn On, Press Open, Press Set-up, with remote, don't close the DVD plate in the whole
process. Press Play on the remote. Choose TV Type in the menu with remote. Press Stop in the
player (No remote). Press |< (Prev) in the player. Press >| (Next) in the player. Region ID
Menu Shows. Select the region (with remote) or Bypass. When in region desired press Play.
Press Setup with remote
Daewoo DVG-5000N
See http://www.nerd-out.com/darrenk/ for instructions
Daewoo DVG-6000D
Code 1
Put a region 1, 2, 3, or 4 and so on into the player when it comes up with "wrong region" just
push the "title PBC" button on the remote and away you go.
Codes 2
Same code as DVG3000N works
Daewoo DVG-9000N
See http://www.nerd-out.com/darrenk/ for instructions
Daewoo S2122
Power up the unit, press OPEN, Press SETUP, insert 33088 followed by the zone number (0 =
all zones). In the main menu screen, a line will disappear and a little box with "R=number" will
confirm the region change.
Dansai DVD1010
Turn it on, press set-up button, then stop, then ff, then skip, then previous. This opens secret
menu, now change region to bottom option.
Dansai DVD852
Code 1
To access the factory set-up page enter the following hack: Press SETUP On Remote, Press
STOP, PREVIOUS, NEXT On Front Panel Of DVD Player. Factory Set-up will appear allowing
region code and macrovision removal. DO NOT SELECT "CSS" OFF or the player will not
recognise any disks at all.
Code 2
Press Setup on the Remote
Press Stop on the front panel of the player
Press Previous on the front panel of the player
Press Next on the front panel of the player
You should now be in a secret menu where you can change the Region from 1 to 6, or Bypass for Region
free