Specifications

Open the Tray. Press "Clear" Button then Press 1,3,6,9. Select the Region code by pressing the
corresponding 1-6 region code, or 0 for all. Close Tray and Switch ON/OFF.
CyberHome AD-L 28
Code 1
Turn on your DVD player and open the tray. Press the stop button on your remote and enter
1999. A menu will pop up. Select the region code using the remote (set it to ALL). Confirm it,
using enter and leave the menu using the return button on your remote. Close the tray,
Code 2
Switch the player on and Open the cd Tray. Press Stop button on the remote control. Press
"3358" on the remote control. Select "region-Code" by pressing region number (1-6). Close
the cd-tray.
Code 3
Turn on the player
Open the tray
Press Stop
Enter 1, 9, 9, 9
CyberHome AD-M 212
When entering the Set-up menu via de [SELECT] - [7] - [6] - [ENTER], enter 13 for the region
code and make it not only region code free, but have it altered permanently.
Cyberhome AD-M 512
Same as above
Cyberhome AD-N212
Press the Open button on the Remote Control to open the drive tray
Press the 7 button on the Remote control
Press the 6 button again on the Remote control
Press the SEL button on your Remote control
Cyberhome AD-N512
Press the Open button on the Remote Control to open the drive tray
Press the 7 button on the Remote control
Press the 6 button again on the Remote control
Press the SEL button on your Remote control
Cyberhome CH-DVD 302
Switch the player on and Open the Tray. Press "Stop". Enter "1999" with the remote control.
Select "Region-Code" using the remote control. Press the "Enter" button on your remote
control. Change the setting to "All". Confirm this with the "Enter" button. Close Tray with the
remote control.
Daewoo DHC-2200K
To convert this player to Multi-Region on later firmware versions Press the Open button on
your remote control Press the Set-up button on your remote control Press the 9 button on your
remote control for Region Free, or 1 for Region 1, 2 for Region 2, and so on. Press the buttons
2, 0, 1 and then 0 on your remote control in order, one at a time
NB: If this doesn't work, you should try pressing the buttons 3, 0, 1 and then 0 NB: If this still
doesn't work, you should try pressing the buttons 4, 0, 1 and then 0 instead Press the Step
button on your remote control Press the Shuffle button on your remote control Press the Next