Specifications
Press Open. Press 3 then 3 then 0 then 8 then 8 then 0. Press Play.
CCE DVD2100
Code1
Press the following button sequence on your Remote Control: Open/Close, Zoom, A-B, Up,
Left, Down, Right. The words "Region Free" should briefly appear on the TV screen.
Code 2
Open tray, Press 9 four times. The screen will show **** after you press 1111 and the Zone
number you pressed after that.
Classic DVD102
Turn on the DVD player with no disc in. Press the Set-up button, then Volume +, Volume -,
Volume +, Volume - After you do that, it will close the set-up menu, and in the Top Right of the
Screen, it will say VER * Use the left and right buttons on the remote (by the select / play key)
to select a region. VER 1 = Region 1,
VER 2 = region 2. Also, you can select Version 255, which is region auto select. Then you press
set-up twice, and insert the disc. It should work like that.
Clatronic DVD-491
Power ON DVD, Open disk tray on front panel on DVD, Press Set-up button on IR remote. Press
on IR remote 3 3 0 8. Press region code number (0 - code free) and Press Set-up button on IR
remote.
Conia M-131
To change to Multiregion press "Open" in the remote, the DVD will open the tray and the
screen must show the word "Open" in the upper left corner. Immediately when the "Open"
word disappears, press 0106x in the remote (x is the region code or 0 for all). If the above was
done correctly the screen must show the word "Ok", then push close.
Cougar CVD515
Make sure you don’t have any DVD inserted and the Door is closed. Power on the DVD. IN
remote control push, OPEN/CLOSE, 2168 (password), press 9 (zone code free), press
OPEN/CLOSE.
Crown
Press the Menu button on the Remote
Press the 1 button, press the 6 button
Press the 7 button, press the Mute button
Converting this player for VCD playback:
Press the Open button on the Remote to open the drive tray
Place an audio CD in the drive tray
Press the Open button on the Remote to close the drive tray
Press the Menu button, press the 1 button. press the Index (1-All) button
Press the Open button, press the 1 button.
Crown CDV661
Press: set-up, goto: general set-up then press: play. Go to: TV display then press: stop, |<<
, >>| .
CyberCOM CC 4931