Specifications

9
Akai DV-P3470
1. Press Open/Close on the remote.
2. Press Setup.
3. Press
1, 3, 6 and 9.
4. Press Left 3 times.
5. Press Right.
6. You should now be in a setup menu.
7. Press 0 for region free (or 1 for region 1, 2 for region 2...).
8. You can also disable Macrovision and enable VCD playback from within this menu.
Converting to Multi-Region if the above does not work:
1. Power on the player.
2. Press Open to open the tray.
3. Press Setup to enter the setup menu.
4. Press 4, 9. 5, 4, and 0 on remote (one at a time, but rapidly ).
5. A new menu line should occur.
5. Select Version and then push Play.
6. Select Region Code.
7. Press > and change the region code with up/down buttons. 0 is region free.
8. Press Setup button to confirm.
9. You can change the VCD setting from same menu
The first method is more likely to work.
Akai DV-P3570SS
1. Power on the player.
2. Press Open to open the tray.
3. Press Setup to enter the setup menu.
4. Press 4, 9. 5, 4, and 0 on remote (one at a time, but rapidly ).
5. A new menu line should occur.
5. Select Version and then push Play.
6. Select Region Code.
7. Press > and change the region code with up/down buttons. 0 is region free.
8. Press Setup button to confirm.
9. You can change the VCD setting from same menu
Akai DV-P4000
1. Switch the power Off, press the Dimmer Switch & the Back Skip buttons at the same time.
2. Still holding the keys down, power the machine On.
3. Four Lines appear on the front panel display. Using the remote control, press 1999 using the numerical keys.
4. The display will change to A-0000 D-04 (Region 3 at this stage)
5. Set Region code using the following:
REGION CODE DISPLAY
0 "00" A-0000 D-00
1 "01" A-0000 D-01
2 "02" A-0000 D-02
3 "04" A-0000 D-04
4 "08" A-0000 D-08