Specifications

84
The resume light will turn on
Press the Power button to turn the player off
Press the Power button again to turn on your player
Note: If steps 7 and 8 don't work, unplug and re-plug your player instead of using the power switch to turn the player
on and off.
K
Kendo DVD-530102
1. Power on the player.
2. Press Open\Close, 3, 3, 0, 8, and 8 on the remote.
3. Press 0 for region free, or desired region number.
Kendo DVD-530103
1. Power on the player.
2. Press Setup, 7, Pause, Rev Skip, Forw Skip, Setup on the remote.
Kennex DVD01-1
1. Turn on the player and ensure there no is disk in.
2. Press Setup, Stop, Skip Back, Skip Forward.
3. then in the menu choose "Region-ID" then select Bypass.
4. Press Play.
5. Press Setup.
Kenwood DVF-5010
Before loading a disc, press and hold the play button on the unit itself (NOT remote control) for about five seconds.
The display panel will then show what region you are (e.g. in Australia it will say Oceania). By using the remote up
and down keys, you can then scroll through the regions until you find the region you require. Select it by hitting the
enter button. The display will then say "Initial OK!". You are ready to put a disc in.
Kenwood DVF 3530
When the region violation screen appears press the menu button twice.
This will cause the LED on the player to change to 01 for a brief period. after the readout disappears press menu twice
more.
Keymat V560
Ensure the players tray is empty and closed
On the Remote control:
Press SETUP
On the players Front Panel:
Press NEXT
Press STOP
Press PAUSE/STEP
Press PREV
Press NEXT
You should now see a new MENU. Go to Select Region and make your choice:
Kioto 2001-MP
1. Turn on the player and ensure there no is disk in.
2. Press 7, 7, Enter (Select) on the remote.