Specifications
79
A new menu should appear.
Choose 0 for region free (or a desired region number).
Turn off the Player at the main power button at the player.
Turn it on again. Settings should now be stored.
Janus DVD
1. Turn on the Player.
2. Press Setup on the remote.
3. Press 2, 0, 0 and 2.
4. Press (< or left) then (> or right) and repeat < followed by >.
5. A new menu should then appear which includes a 'version' sub menu.
6. In the 'version' menu select 'region' and then select your desired region code, or 0 for region free.
7. Press Setup.
JBL DSC-400
1. Open the DVD tray
2. Press and hold 6 on remote control.
3. Press Menu/PBC. The current region code will be displayed on screen.
4. Keep pressing Menu/PBC until the preferred region code is selected (0,1,2,3,4,5,6).
5. Press and hold Angle for more than 2 seconds to save the region code. "Writing Region ID" will appear on screen.
JDB Slimline-2
1. Open the player's tray.
2. Press Next, Prev, Next, Prev, Next, Prev on the remote.
3. Using the left and right arrow keys, change the number displayed from "2" to any region required or 255 for region
free.
4. Press Select to finish.
NB: Press Setup if Select (step 4) does not finish.
JDB V600R
1. Open the player's tray.
2. Press 8, 4, 2, and 1 on the remote.
3. The Region menu should appear.
3. Press Enter to cycle through regions. 9 is region free.
4. Press Return to close the menu.
Jenki JK-901K
1. Power the player on.
2. Open the player's tray.
3. Press Setup on the remote control.
4. Use the arrow keys to select Custom Setup.
5. Using the remote control, key in the following: Enter, 3, 3, 3 and 3.
6. Select the required region or use 0 for region free.
7. Press Enter.
JMB DVD-3000
1. Power on your machine
2. Press Stop, Open/Close and Skip on your player simultaneously and hold down for 3 seconds
3. A hidden menu should appear. Release the Stop, Open/Close and Skip buttons on your player
4. Select Region Number from the hidden menu and choose the Free option. DO NOT make any selections from the
Initialised Type menu, this can leave your machine inoperable. If you do by accident, go back to this menu and select
option 1.
5. Exit the Menu.