Specifications

75
Press the 9 button on the Remote Control for Region free, or 1 for Region 1, 2 for Region 2 etc. Press the Open button
on your player; Press the Standby button on the Remote Control
Hitachi HTD-K150
Open the DVD player CD Tray
Press Volume Up on your Remote
Press Fast Forward on your Remote
The on screen display will show 321 followed by the current Region code
Press Volume Up on your Remote
Press Fast Forward on your Remote
Repeat steps 5 and 6 until the desired Region code is shown on the display
Press and hold the Angle button on the Remote for approximately five seconds to select the Region
Hitachi HTD-K170
Press Setup button on your remote control
Press Last button on your remote control
Press Skip Previous button on your remote control
Press Skip Next button on your remote control
You will now enter the LoopHoles menu where you can alter the region of this unit
or
Default settings first - eg. setup/preferences/default then set to reset
on remote:
press open
press setup
press 1,1,1,1,1,0
it will display "OK"
Hiteker AD-600A
Press the Set-up button on your remote control.
Using the onscreen menu, select the Preferences option.
Press the Still/Step button on your remote control.
Press the Prev button on your remote control.
Press the Next button on your remote control.
You will now enter the hidden set-up page, and can change the player to any Region or set it to Region Free.
Hiteker BI-600
Turn unit on (on the remote) do the following. Press set-up. Press stop. Press skip left. Press skip right. The hidden
menu will appear select regions and choose bypass. Its now region free, you can also shut off macrovision.
Hiteker HE-1120
Turn on player; make sure there’s no disk inside! Press set-up, press stop, press skip left |<< , press skip right |>> now
you are in factory settings screen you see: Version: (my player):V25J01131 region ID (standard on region 2) CSS (for
new protection disks?)Standard auto (on) Macrovision (standard auto)(on) Automute Dither now go with remote on
region (blue buttons on remote), press right and choose "bypass" confirm with enter! Macrovision same deal set to
"off" confirm with enter (play).
Hoher T20
Switch On the player.
Ensure that there is no disc inserted
Press Menu, 2, 0, 1, 1, Then 0 for Multiregion, or the number of the region required.