Specifications

58
7. Push > and change the region code with up/down buttons. 0 is multi region.
8. Press Setup button to confirm.
NB:You can change the VCD setting from same menu.
EuroLine DVH-6675
1. Open the drive tray.
2. Press the buttons 9, 8, 1 and 7 on your remote, one at a time and in order.
3. You will now be in the hidden menu where you can change the region from 1 to 6 by pressing Enter on your
remote control, or set it to 9 for multi-region.
4. You can also disable Macrovision from this screen.
5. If your TV does not support NTSC, you should change the output to PAL in the normal setup menu.
Euroline 6620
Open the DVD tray
Enter 3, 3, 0, 8 on the remote control (you will see XXXX on the top left of the screen)
Enter the region code of your choice, 1 for region 1, 2 for region 2 etc. and 0 for region-free
You should see your selected region in the top left of the screen for a short while.
F
Ferguson DFE-100 DVD
With the DVD player in the stop mode...
2. Press Up, Down, Left, Right, 1, 2, 3, 7, 8, 9, 4, 5 and 6.
Ferguson DVD-400FE
Press the Menu button on the Remote
Press 1,6,7 on the Remote Control
Press the Mute button
Converting this player for VCD playback:
Press the Open button on the Remote to open the drive tray
Place an audio CD in the drive tray
Press the Open button on the Remote to close the drive tray
Press Menu, 1, Index (1-All) button
Press the Open button
Press the 1 button
Ferguson LDVD200
1) Open the DVD Door, on remote press Setup, Right, Right, Right (that’s the arrows in the middle of remote)
2) Enter 9653,a service page will appear,
3) Use Up/Down Bottom to change region Codes
4) Set to 0 (zero) for multi-region
Finlux DVD-212
Open player tray.
Press Setup.
Press 4,9. 5, 4 and 0.
"Version" menu should appear.
Within this menu, you can change the region.
Finlux DVD-213