Specifications
56
3. XXXX will appear on the top left hand corner of the screen.
4. Press 0 for all regions (or 1, 2, 3 etc for a region).
5. Close the tray.
Emerson EMD-2100
1. Press Open.
2. Press 9 for region free (or desired region number).
4. Press 2, 0, 1 and 0 on the remote control. If this does not work try pressing 5, 0, 1, 0 fast.
5. Press Setup, Shuffle and Next. (Point remote directly at the player, as open tray can interrupt the signal).
Check the region setting:
1. Press Open, Setup, Shuffle, Step and Next on the remote control.
2. A secret menu appears. Scroll down to the DEBUG option, where the region status is displayed.
Fix low sound problems when connected to SCART on TV:
1. Press Setup, Stop, Step, Angle on the remote control.
2. The word RFOUT will appear on the screen briefly and the sound will have been adjusted to normal levels.
No known problems apart from possible low sound, fixed via the method above.
Encore DV-450
Check firmware revision:
1. Press Setup button on the Remote.
2. Press 1, 2, 3 and then 4.
3. You should now see the firmware version date.
Checking for firmware if the above does not work on your system:
1. Press Setup button on the Remote.
2. Press 1, 2, 3, 4 and then 5.
3. You should now see the firmware version date.
Converting this player to Multi-Region if this fails (newer firmware):
1. Press the Setup on the remote.
2. Press 3, 8, 8, 8, 3 on the remote. IMPORTANT: These numbers must be typed correctly, or the video-out
capability may not work correctly any more!
3. You should now be in a hidden menu.
4. You can change the region or set it to region-free.
Alternate Multi-Region method:
1. Press the Setup button on your remote.
2. Press 3, 7, 7, 4.
3. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free.
Select PAL or NTSC:
1. Press Setup on the remote.
2. Press 7, 2, 5, 5, 5 on the remote control.
3. You should now be able to change the output between PAL, NTSC and AUTO.
Setting CSS and Macrovision:
1. Press Setup.
2. Press 5, 9, 0, 4, 1, and 9 on the remote.
3. There are then two options available: CSS and Macrovision.