Specifications

This brings up the engineers menu

The region code is listed under "country code" and can be changed from 1 to 2 or whatever , (NOTE if you change it

to 13 it will play all discs 1 or 2 but I don't as yet know if this is a sort of region 0 and would cause problems with

certain discs which apparently will not play on region 0 machines)

Press play to exit menu then close drawer and away you go.

Macrovision is also selectable from this same menu and is a value of up to four digits , please let me know if you hear

of any code to disable it.

Digitor DVD 2117

Ensure no disc is in the tray

press 1 on remote

press 6

press 7, then

press 0, for All Zones, or press the number according to the disc region you wish to select.

The DVD player should now play DVD's from all regions.

Digitor DVD 3119 & 3122

Press 16719

Press OK when config menu pops up

Choose 0 for all regions

Press Exit

Digitor G1602 & G1605

Press 16719 on remote control.

Press OK when config menu pops up .

Choose 0 , for All Regions, or the region number required.

Press Exit.

Digitor G1605

Turn Power on

Open Door (onscreen display reads insert a disc )

Using the remote press 16719 while pointing remote at dvd player

Config menu is now displayed onscreen, press ok

Press 0 to change to all regions

Press Exit on the remote

Dvd player will now play any dvd.

Digitrex GK-1100

1. Press the Open/Close button on your remote control

2. Press 3.

3. Press 4.

4. Press 9.

5. Press 7.

6. Press 3.

7. Press 4

8. Press 0 for region free.

9. The display should state REGION FULL.

Digitron DVS-360