Specifications

47
In the setup menu go to VERSION, Press PLAY
1. Press Right Arrow (>).
2. Press Up/Down Arrow to change region.
3. 0 is region free.
4. Press Play to lock region.
Daytek DVD-707
1. Power On the player.
2. Press Setup.
3. Press 1,3,6,9,8,8,8 and 8 on the remote.
4. A new menu item, "version", appears.
5. Press Cursor Down until "version" is highlighted.
6. Press Play.
7. Press Cursor Up or Cursor Down to set the region code to "1", "2", or "0" (multi-region).
8. Press Setup.
Daytek DVD-1500
1. Power On the player.
2. Press Setup.
3. Press 1,3,6,9,8,8,8 and 8 on the remote.
4. A new menu item, "version", appears.
5. Press Cursor Down until "version" is highlighted.
6. Press Play.
7. Press Cursor Up or Cursor Down to set the region code to "1", "2", or "0" (multi-region).
8. Press Setup.
Dayton DVD-777
1. Power On the player.
2. Press Setup.
3. Press 1,3,6,9,8,8,8 and 8 on the remote.
4. A new menu item, "version", appears.
5. Press Cursor Down until "version" is highlighted.
6. Press Play to select it.
7. Press Cursor Up or Cursor Down to set the region code to "1", "2", or "0" (multi-region).
8. Press Setup.
Converting to Multi-Region if the above does not work:
1. Remove any disk (empty tray).
2. Entire switch off (not just standby).
3. Power On the player.
4. Press Setup.
5. A menu appears.
6. Press 1,3,6,9,8,8,8 and 8 on the remote.
NB: You will not see any feedback.
7. A new menu item, "version", appears.
8. Press Cursor Down until "version" is highlighted.
9. Press Play to select it.
10. Press Cursor Up or Cursor Down to set the region code to "1", "2", or "0" (multi-region).
11. Press Left Cursor to select desired region.
12. Press Setup.
Deccavideo DDV-2110
1. Press Setup on the Remote
2. Press Stop on the front panel of the player
3. Press Prev.