Specifications

46
Dansai DVD-951S
1. Press Setup on the Remote
2. Press Stop on the front panel of the player
3. Press Previous on the front panel of the player
4. Press Next on the front panel of the player
5. You should now be in a secret menu where you can change the Region from 1 to 6, or Bypass for Region free
You can also disable Macrovision from this menu.
Dansai DVD-952
1. Press Setup on the Remote
2. Press Stop on the front panel of the player
3. Press Previous on the front panel of the player
4. Press Next on the front panel of the player
5. You should now be in a secret menu where you can change the Region from 1 to 6, or Bypass for Region free
You can also disable Macrovision from this menu.
Dansai DVD-955
1. Open Tray
2. Press Setup on the Remote
3. Scroll right to the last menu
4. Press "3" on the remote four times
5. Select "0" ( region free )
6. Press "setup".
Dansai DVD1010
1. Press stop
2. Press forward
3. Press previous
4. Press next
Dantax DVD-1000
Open the players tray
On the Remote Control, key in 9, 9, 2, 6
Then press 0
Close the DVD Player tray
Turn the power off, and turn power on again after approx. 1 minute
The DVD player will now recognise DVD from any region
If you have problems with the above, or problems with RCE discs try:
Replace 9, 9, 2, 6, with 8, 9, 2, 6
Dantax DVD-1500
Open the DVD tray
Press9999x, where x is the region you desire
Close the DVD tray.
Datawrite DVD
1. Power On DVD Player
2. Press Setup.
3. Press NO:2002.
4. Press Left arrow (<).
5. Press Right Arrow (>).
6. Press Left Arrow (<).
7. Press Right Arrow (>).