Specifications

35
2. Press 2, 4 and 7 on the remote.
3. The display should now show "...........".
4. From the remote, enter the code 004 000 000 000 Note that the last digit will not show on the display.
D
Daewoo 3700
1. Press Open/Close, Setup on the remote control.
2. Press the number of the region you want, or 9 for region free.
3. Press 3, 0, 1, 0, Step, Shuffle, Next on the remote control.
To check the region, you will need to see the hidden menu:
1. Press Open/Close, Setup, Shuffle, Step, Next on the remote control.
2. Scroll down to Debug, which shows the region number.
3. For Macrovision firmware patches, go Daewoo 3700 firmware
patch.
Daewoo 5700
1. Press Open/Close (to open tray), Setup, Shuffle, Step, Next on the remote.
2. You should be able to see the secret menu and scroll down to DEBUG and the list shows from 1-9 (which is
regions). Option 9 is region free/bypass.
3. By default 1 is ticked and will not able to change permanently.
Daewoo 5800
1. Press Open/Close, Setup on the remote control.
2. Press the number of the region you want, or 9 for region free.
3. Press 3, 0, 1, 0, Step, Shuffle, Next on the remote control.
To check the region, you will need to see the hidden menu:
1. Press Open/Close, Setup, Shuffle, Step, Next on the remote control.
2. Scroll down to Debug, which shows the region number.
3. For Macrovision firmware patches, go Daewoo 5800 firmware
patch.
Daewoo 5800D
1. Make sure there is no disc in the drive.
2. Press Setup, Stop, Skip Back, Skip Forward on the remote.
3. Select Bypass for region free.
3. Press enter (yellow play button).
4. Press setup.
Daewoo 9000N
1. Insert foreign DVD disk
2. Press Setup, Stop, I<<, >>I, then select the region required.
3. Press setup, Set Up, then exit from set up menu.
4. Then press Play.
5. Then press p/n button to select relevant TV type (not auto).
Note that player will revert to default settings when you turn power off.
Daewoo DHC-2100
To convert this player to Multi-Region (newer firmware):
1. Press Open button on your Remote Control.