Specifications

34
Change region code to 0.
If code doesn't work, see "PARENTAL".
(setup / general / parental)
If "8:OFF" is selected, change to another one
(e.g "2 : G") (Password is "1369").
Cyberhome CH-DVD-405
1. Turn on the player.
2. Press Setup.
3. Enter 1, 3, 6, 9.
4. Press 3 x Left.
5. Press 1 x Right.
6. A new entry appears in the setup menu, called "Version" there, you can change the region code with the Up and
Down arrows.
7. Changing this value to "0" sets the player region free.
Cyberhome CH-DVD-500
1. Turn on the player.
2. Open the tray.
3. Press Stop.
4. Enter 1, 9, 9, 9 in order, and one at a time.
5. You should now be in a hidden menu. You can change region code to all, but not disable Macrovision.
Cyberhome CH LVD-702
1. Turn on the player.
2. Open the tray.
3. Press Stop.
4. Enter 1, 9, 9, 9 in order, and one at a time.
5. You should now be in a hidden menu. You can change region code to all, but not disable Macrovision.
Cyberhome CH LVD-712
1. Turn on the player.
2. Open the tray.
3. Press Stop.
4. Enter 1, 9, 9, 9 in order, and one at a time.
5. You should now be in a hidden menu. You can change region code to all, but not disable Macrovision.
Cyberhome MP016-A
:
1. Ensure the players disk tray is Closed with no disc.
2. Power on the player.
3. Press Stop.
4. Enter 4, 4, 0, 8.
5. You should now be in a hidden menu, set the region code to 0 for region free.
Cyrus DVD-7
1. To change Region on this player, one uses what looks like the old Philips setups:
2. Press Play on the Remote Control.
3. Press 2, 5, and 6.
4. The display should now show "...........".
5. From the Remote, enter the code 222 222 005 255. Note that the last digit will not show on the display.
6. Press Play.
To reset this player back to factory defaults:
1. Press Play.