Specifications

33
1. Ensure the players disk tray is Closed with no disc .
2. Press Menu.
3. Press 1.
4. Press 9.
5. A menu will appear with the region number near the bottom of the screen.
6. Press Enter.
7. Select the desired region.
8. Press Enter to save the settings.
CyberHome CH-DVD 302
Switch the player on and open the tray
Press "Stop"
Enter "1999" with the remote control
Select "Region-Code" using the remote control
Press the "Enter" button on your remote control
Change the setting to "All"
Confirm this with the "Enter" button
Close tray with the remote control.
Cyberhome CH-DVD-320
Switch the player on and open the tray
Press " menu"
Press 1 on the remote control then 9
A new menu will pop up
The region code will show 1
Press " enter"
It will show " --"
type 0 for all regions
Press "enter"
To finish press "open/close"
Cyberhome CH-DVD-400
1. Turn on the player.
2. Press Setup.
3. Enter 1, 3, 6, 9.
4. Press 3 x Left.
5. Press 1 x Right.
6. A new entry appears in the setup menu, called "Version" there, you can change the region code with the Up and
Down arrows.
7. Changing this value to "0" sets the player region free.
CyberHome CH-DVD 402
Player "on"
Open tray
Press "setup” button
Press 1,3,6,9 on your remote control
Press left cursor 3 times
Press right cursor once
New tab appears "Version"
Select "Version"
Go to "region code"
Cursor left