Specifications

32
1. Press Open on the remote control to open the drive tray.
2. Press 4, 5, 6 and 1, in order, one at a time.
3. Select Enable to enable Macrovision, or Disable to disable Macrovision.
Some have problems altering Macrovision.
CyberCOM CC 4931
Open the tray
Press "Clear" then press 1,3,6,9
Select the Region code by pressing the corresponding 1-6 region code, or 0 for all
Close tray and switch ON/OFF.
CyberHome AD-L528
Turn on the player
Open the tray
Press Stop
Enter 1, 9, 9, 9
CyberHome AD-N212
Press the Open button on the Remote Control to open the drive tray
Press the 7 button on the Remote control
Press the 6 button again on the Remote control
Press the SEL button on your Remote control
Cyberhome AD-N515
Press Open button on the remote control to open the drive tray
Press 7.
Press 6.
Press SEL.
You should now enter a hidden setup page.
Select a Country code 13 for region free.
This setup may not work on all versions of firmware. Note that the newer Cyberhome AD-M512 model doesn't appear
to support this setup.
CyberHome AD-M 212
Power DVD on with no disc in
Press 7 6 on remote
Then press Select
Takes you to the service menu
Then select region 13 for multi region
Next page has macrovision
Set to 0 to disable it.
CyberHome AD-N512
Press the Open button on the Remote Control to open the drive tray
Press the 7 button on the Remote control
Press the 6 button again on the Remote control
Press the SEL button on your Remote control
Cyberhome CH-DVD-300