Specifications

31
Enabling VCD playback:
1. Press Setup on the remote control.
2. Press down arrow 4 times to highlight the Password Setup option.
3. Press Enter/Play to enter the Password area.
4. With the Password Mode section highlighted as "on", press the left arrow 5 times.
5. You should see "VCD ENABLED" in the bottom left hand side of the screen.
6. Press the power off button to finish.
Conia M-131
To change to Multiregion press "Open" in the remote, the DVD will open the tray and the screen must show the word
"Open" in the upper left corner. Immediately when the "Open" word disappears, press 0106x in the remote (x is the
region code or 0 for all). If the above was done correctly the screen must show the word "Ok", then push close.
Cougar CVD-515
Ensure the player has no DVD in it's tray, and that the tray is closed
Power on the player
Press Open / Close on the Remote Control
Press 2168 (Password)
Press 9 for Region free - or 1 - 6 for various regions
Press Open / Close
Crown CDV-661
1. Make sure there is no disc in the player.
2. Press Menu, 1, 6, 7 on the remote.
3. Press Mute for region free (or 1 to 6 for desired region).
To convert this player for VCD playback
1. Press Open on your remote control to open the drive tray.
2. Place an audio CD in the drive tray.
3. Press Open on your remote control to close the drive tray.
4. Press Menu.
5. Press 1.
6. Press Index (1-All).
7. Press Open.
8. Press 1.
Crown CDV-1100
1. Press Open/Close on your remote control to open the drive tray.
2. Press 8, 4, 2 and 1, in order, one at a time.
3. Press Enter until
the hidden menu appears.
4. Select All for region free (or 1 to 6 for desired region).
5. Press Open/Close.
Converting to Multi-Region if the above does not work:
1. Press Open/Close on your remote control to open the drive tray.
2. Press 9, 8, 1 and 7, in order, one at a time.
3. A region menu should appear.
4. Select 9 for region free (or 1 to 6 for desired region).
5. Press Open/Close.
To alter the Macrovision settings on this player: