Specifications

281
3. You should now be in a hidden setup menu where you can change the region code to 1 for Region 1, 2 for Region
2, and so on, or All for multi-region playback.
Converting this player to Multi-Region if the above does not work:
1. When the logo is displayed on the onscreen display, press the Stop button on your remote control.
2. Press 2, 3, 1 and 7, in order, one at a time.
3. Press the button on your remote control which corresponds to your chosen region, for example 1 for Region 1, 2
for Region 2, and so on.
4. Power off the unit, then power it back on.
To bypass Macrovision, set the picture to NTSC, then back to PAL again.
Zenix Z-2001
1. Press Stop twice, in succession, on your remote control twice.
2. Press Setup, Vol+, Vol-, Vol+, Vol- in quick succession.
3. Ver# should now be displayed.
4. Use the Left/Right cursors to select a region, or press 255 for region free.
5. Press Setup.
Zoom Tech H9663N
1. Turn player on with no disk in drive.
2. Press Setup.
3. Alternate volume '+' and '-' on the Remote until the menu disappears and you get "ver 2" displayed in the top right
of the screen
4. Press the left or right arrow keys on your remote to scroll through the different regions until you get to the one you
want.
5. Press Setup to save.
6. Select ver 225 to set to all Regions.
Region free mode may not play the newer RCE DVD's..