Specifications
280
Enabling VCD Setup:
1. Power on the player with no disk in the drive
2. Press Pause on the Remote.
3. Press 1, 4, 7, 2 (the characters 01 47 should appear on the display, if your player is a non UK model, this number
will probably be different).
4. Press Arrow Up Three times (the characters 04 Fd should appear on the display).
5. Press Program, 6, Program, 5 (the characters 04 FE should now be displayed).
6. Press Enter (the display should flash briefly).
7. Press Return.
8. Power the player off and then back on.
9. Play a VCD.
To view the firmware version of this player:
1. Press Setup button on the Remote Control.
2. Select TV Aspect and place the cursor on the 16:9 Wide option.
3. Press 1, 3, 9, 7, 1, 3 and 9.
4. Press Enter.
5. You should now see the version information screen.
6. Press Setup on the Remote Control to exit this info screen.
Setup does not appear to always change region. RCE discs will require specific region set.
Zenith DVD-2381
Press the Pause button on your Remote Control
Using your Remote Control enter the code 3, 1, 4, 1, 5 and 9
Press the 0 button on your Remote for Region free, 1 for Region 1 or 2 for Region 2
Press the Pause button on your remote control
Power off your player and wait a few seconds
Power on your player.
Zenith DVC2200, Zenith DVC2550,
Zenith DVD2201, Zenith DVD2381,
Zenith DVD5201, Zenith IQDVC2350,
Zenix Z-2001
Code 1
Power on the player with no disk in the drive. Press "PAUSE" on the remote. Enter "3 1 4 1 5 9" on the remote (the
word COdE appears on the display). Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.) .
Press "PAUSE" on the remote. Power the player off and then back on
To play any region disc in these players shown below simply follow these instructions
Open the tray, place an R1 disc on it but don't close it. On the remote press 0, 1, 2, 3, PLAY The tray should then
close, if not close it, and the player is now completely region free
Code 2
Multi Region Setup
Power on the player with no disk in the drive
Press PAUSE on the Remote
Enter 3, 1, 4, 1, 5, 9 on the Remote (the word COdE appears on the display)
Enter 0 on the Remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
Press PAUSE on the Remote. Power the player off and then back on.
Zenix H-315L-S
1. Press Stop twice, in succession, on your remote control twice.
2. Press 1, 9, 9 and 9, in order, one at a time.