Specifications

28
1. Turn the player on.
2. Open the tray.
3. Press 0, 8, 1, 5.
4. Press 0 for region free.
5. Close the tray.
NB: Macrovision is off from the factory.
CAT DV-933
1. Turn the player on.
2. Open the tray.
3. Press 0, 8, 1, 5.
4. Press 0 for region free.
5. Close the tray.
NB: Macrovision is off from the factory.
CAT DVA-2002
This player is region free from the box.
If have problems, Just switch off at mains for 10 minutes. Switch back on, insert region 1 DVD in the tray, and it
should play normally.
NB: The first DVD must
be region 1.
CAVS DVD-101G
1. Power On with no disc in the player.
2. Open the tray
3. Go to Setup
4. Scroll down to Karaoke Setup
5. Enter 9, 9, 9, 9 and the region code you want (0) for all regions
6. Press Setup
7. Close the tray
The player is now set to the region you want. Unfortunately, this is not permanent so if you power off the system you
will have to do this again.
CCE DVD-2100
1. Press Open/Close on your Remote to open the drive tray.
2. Press Zoom.
3. Press A-B.
4. Press Up.
5. Press Left.
6. Press Down.
7. Press Right.
8. The words Region Free should briefly appear on screen confirming that your player is now region free.
Converting to Multi-Region if the above does not work:
1. Press Open/Close on the Remote Control to open the drive tray.
2. Press 1 (4 times).
3. Press 9 for region free or (1 to select Region 1, or 2 to select Region 2, etc.)
4. The screen will show **** after you press 1111 and the Region number you pressed after that.
Cinevision DVP-650
1. Power On with no disc in the player.
2. Open the tray.