Specifications

274
3. Press 1.
4. Press 6.
5. Press 7.
6. You should now see a new menu.
7. Select 0 for region free (or select required region number).
XLogic DVD-838J
1. Press Setup on the remote.
2. Press 1.
3. Press 3.
4. Press 6.
5. Press 9.
6. Press Left Arrow three times.
7. Press Right Arrow once.
8. You will see a hidden menu.
9. Select your region and Macrovision preferences.
XMS 750, 250, 950
To change the player Region code follow the below steps:
Open the players draw
Key in using the Remote 8926 followed by the Region code your require, i.e. 1 for Region 1 etc.
Keying in 0 sets the player to Region free mode and reportedly disable Macrovision
Xoro HSD-400, Xoro HSD-420
1. Press Arrow Up twice.
2. Press Arrow Down twice.
3. Press Arrow Right once.
4. Press Arrow Left once.
5. Press 0 for region free (or Press required region number).
6. Press Left Arrow three times.
7. Press Enter to confirm.
Xwave LB 900, Xwave LB 1000
Power on the DVD without any CD inside. Press on your remote: set-up, step, ffwd, fbwd Now press: pause, stop, key
+ or key -, With the key + or key- you can change it to Region 0. Now leave the Region to 0 for a code free DVD.
Y
Yamaha DVD S510, Yamaha DVD S520
You'll need a One-for-All 6 remote with the code 0539. Power on the unit and then key in 085. The player’s display
should then show a series of dashes. Press 222 222 005 255 and then 'play'
Yamakawa 218, Yamakawa 713,
Yamakawa 715, Yamakawa 780,
Yamakawa 820, Yamakawa 860
Code 1
Turn on player and wait for "no disk".
Use remote and push the following buttons, set up, mute, stop, zoom.