Specifications

273
11. Power off your player.
12. Power on your player.
There may be a newer firmware version for this model, for which there is no setups at the current time.
Wharfedale M5
Press Setup to go into the setup menu
Type 62836
Press Enter
Select All
Press Enter
Now press Setup to exit from the menu
Wintel WIN-9663
Open the players tray and ensure that there is no disc in it
Press Setup
Then Step
Then Prev
Then Next from the Remote Control
You should get a new menu titled, FACTORY SETUP
From there you can pre-select region (for RCE disks) and disable Macrovision
Wintel WIN-9963
1. Open the players tray and ensure that there is no disc in it
2. Press Setup on the remote.
3. Then Step.
4. Then Prev.
5. Press Next.
6. You should get a new menu titled, FACTORY SETUP.
7. From there you can pre-select region (for RCE discs) and disable Macrovision (works best with native NTSC
VCRs).
X
Xenius DVD 1030
Switch on player with an empty tray
Ppress menu and then the numbers 1 6 and 7
A little black menu screen will appear giving you selections of 1 – 6
For multi region press 0
Xenius HTX 2200
Turn on the player from the power button NOT THE REMOTE
In DVD mode eject the tray
Using the remote press 8, 1, 3, 2 & 8
Press enter to cycle through regions 1 to 6 or 9 is region free
Press the return key (next to the power key) to close out the command
Xenius DVDX 2030
1. Make sure your player is powered on and the tray is empty.
2. Press Menu on the remote.