Specifications

272
Welkin T-123
Switch on.
Press "open/close" -leave drawer open.
Press "clear"
Press 1,3,6,9,0 (where 0 is region 0/multi region)
Press "open/close" and close drawer
Open drawer insert disc for required region
Close drawer
May take a couple of attempts and there's no obvious sign that it works other than trying a disc.
Wharfedale DVD-750
Open the DVD players tray.
Place a Region 1 disc in the tray, but don't close it.
Press the buttons 0, 1, 2 and then 3 on your remote control in order, one at a time.
Press the play button on either your remote or the player.
To change the player back to Region 2 only functionality:
Open the DVD players tray.
Place a Region 2 disc in the tray, but don't close it.
Press the buttons Return and then Play on your remote control in order, one at a time.
Wharfedale DVD-750S
Press the Open/Close button on your Remote Control
Press the Zoom button, Press the A-B button, Press the Up button
Press the Left button, Press the Down button, Press the Right button
The words Region Free should briefly appear on screen confirming that your player is now region free
Wharfedale DVD-M3
1. Press Open on the front of the player to open the drive tray.
2. Press Setup on your remote control.
3. Press the buttons 4, 9, 5, 4 and 0, in order, one at a time (using the remote).
NB: You may need to perform this step quicker if this doesn't work as expected.
4. The onscreen display will display the word Version.
5. Press Play on your remote control.
6. Press Right on your remote control to highlight the currently selected region number.
7. Using Left and Right buttons on the remote control, you can alter the region to 1 for region 1, 2 for region 2, and
so on, or 0 for multi-region playback.
8. You can also enable VCD and HDCD playback from this menu.
9. Press Setup on your remote control.
10. Press Open on the front of the player to close the drive tray.
11. Power off your player.
12. Power on your player.
To convert this player to Multi-Region if the above does not work:
1. Press Open on the front of the player to open the drive tray.
2. Press Setup on your remote control.
3. Press 8, 8, 8 and 8, one at a time (using the remote).
4. The onscreen display will display the word Version.
5. Press the Play on your remote control.
6. Press the Right on your remote control to highlight the currently selected region number.
7. Using the Left and Right on your remote control, you can alter the region to 1 for region 1, 2 for region 2, and so
on, or 0 for multi-region playback.
8. You can also enable VCD, HDCD and possibly even WMA playback from this menu.
9. Press Setup on your remote control.
10. Press Open on the front of the player to close the drive tray.