Specifications

270
Venturer STS-20-S
1. Open the player tray.
2. Press 8, 1, 3, 2, 8 on your remote.
3. A window will appear on your TV screen.
4. Press Enter to move to region 9 (region free).
5. Press Play to close the tray.
6. The machine is now permanently multi region.
Enabling VCD playback:
1. Turn On the player and place a VCD on the open tray
2. Press Close quickly followed by Menu (on the player's front panel).
3. Press 5 on the remote
4. This should load and play the disc. If the disc fails to play then press 0, 0, 0, 1 and the disc should then play
5. If this fails to work then you may wish to consider using the setup for the Goodmans GDVD-135.
Venturer STS-21 (most STS-21 models)
1. Open the player tray.
2. Press 8, 1, 3, 2, 8 on your remote.
3. A window will appear on your TV screen.
4. Press Enter to move to region 9 (region free).
5. Press Play to close the tray.
6. The machine is now permanently multi region.
Enabling VCD playback:
1. Turn On the player and place a VCD on the open tray
2. Press Close quickly followed by Menu (on the player's front panel).
3. Press 5 on the remote
4. This should load and play the disc. If the disc fails to play then press 0, 0, 0, 1 and the disc should then play
5. If this fails to work then you may wish to consider using the setup for the Goodmans GDVD-135.
For the STS-21-S, the picture is in black and white, regardless of region. No known problems for other STS-21
models.
Venturer STS-32-S
1. Power on the player (not from Standby).
2. Open the player's tray.
2. Press 8, 1, 3, 2, 8 on your remote.
4. Press Enter to move to region 9 (region free)..
5. Close the tray.
6. Power Off and On again, not from Standby.
Venturer STS-32AAS10
1. Power on the player (not from Standby).
2. Open the player's tray.
2. Press 8, 1, 3, 2, 8 on your remote.
4. Press Enter to move to region 9 (region free)..
5. Close the tray.
6. Power Off and On again, not from Standby.
Vieta DVD-2
Press Open on the remote.
Press Setup.
Press 9, 6, 0, 1, 0.
Press Step.