Specifications
261
6. Select "Region Code".
7. With Up and Down cursor select Region "0" for region free.
8. Exit Setup.
Technosonic DVD-202
1. Ensure there is no disc in the player.
2. Press Setup, Setup, Next, Prev, Next, Prev.
3. repeated pressing of Next and Prev may be necessary.
4. You will then see VER followed by number on the top right hand corner of the screen.
5. Using the right arrow key, change the number to 255 for region free.
Disble Macrovision
1. Use the steps 1-3 above to get to the VER numbers.
2. Change the VER entries of 3001 and 4001 onscreen, to 3001 and 4001 respectively.
Technosonic DVD-204
1. Ensure there is no disc in the player.
2. Press Setup, Setup, Next, Prev, Next, Prev.
3. repeated pressing of Next and Prev may be necessary.
4. You will then see VER followed by number on the top right hand corner of the screen.
5. Using the right arrow key, change the number to 255 for region free.
Disble Macrovision
1. Use the steps 1-3 above to get to the VER numbers.
2. Change the VER entries of 3001 and 4001 onscreen, to 3001 and 4001 respectively.
You may not be able to change macroversion for some newer firmware..
Terapin TT1800
1. Ensure there is NO DISC in the player
2. Press set up
3. Using the right arrow move to "Preferences" icon on top.
4. Press 1607
5. A new screen is displayed with different numbers.
6. Press left arrow 3 times
7. Press right arrow 1 time.
8. Press down arrow 2 times - you will not see the cursor move or the number "1" change to zero.
9. Press setup to exit.
10. Repeat steps 1 through 4 and the number in the green box at the bottom will have changed from '1' to '0'.
11. This is now region free
Tevion DVD-200 & 2001
Converting this player to all region:
Press the Menu button on the Remote
Press the 1 button
Press the 6 button
Press the 7 button
Press the Mute button
Tevion DVP7011
1) Open the DVD Door, on remote press Setup, Right, Right, Right (that’s the arrows in the middle of remote)
2) Enter 9653,a service page will appear,
3) Use Up/Down Bottom to change region Codes
4) Set to 0 (zero) for multi-region