Specifications
259
2. Press 3, 8, 3, 8 on the remote control.
3. A menu will appear.
4. Choose which region you want, or use 9 for region free. You can also turn off Macrovision here.
5. Close the tray
Teac PLD-1200
1. Open the disc tray.
2. Press 8, 1, 3, 2, 8 on the remote control.
3. Press Enter.
4. Select 9 for region free.
5. Close the tray
Technika 108
1. Press the Open to open the drive tray
2. Press the Setup on your remote control
3. Using the Left button on your remote control, change the display to the Preference Page
4. Press the Down button on your remote control to highlight the Set TV Standard option
5. Using your remote control, press the buttons 4, 9, 5, 4, 0
NB: You may need to perform this step quicker if this doesn't work as expected
6. The onscreen display will display the current region
5. Using the Up and Down buttons on the remote, change the region to 1 for region 1, 2 for region 2, and so on, or 0
for multi-region playback
6. Press Setup on the remote control
7. Power off your player
8. Power on your player
note, some DVD's may require a password, the password is 49540 as above
(You will need to change region 1
st
).
Technika DVD-212
1. Press Setup on the remote control.
2. Press Stop on the front panel of the player.
3. Press Previous on the front panel of the player.
4. Press Next on the front panel of the player.
5. You should now be in a secret menu where you can change the Region from 1 to 6, or Bypass for Region free.
6. You can also disable Macrovision from this menu.
Technika DVD-300
1. Press Open on the remote control.
2. Press Setup.
3. Move the selection to the Custom Settings option.
4. Press 3, 3, 3, 3.
5. You should now be in a secret menu where you can change the Region from 1 to 6, or Free (or 0) for Region free.
6. You can also disable Macrovision from this menu.
Technika DVD-351
1. Press Setup on the remote control.
2. Press Stop on the front panel of the player.
3. Press Previous on the front panel of the player.
4. Press Next on the front panel of the player.
5. You should now be in the region/version menu where you can change the Region from 1 to 6, or Bypass for
Region free.
Cannot change macrovision on this model.