Specifications

250
Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 0 for multi-region playback
Press the Open/Close button on your remote control
Schneider DVD-1003
Press Open/Close button on your remote control.
Press Clear.
NB: This is located next to the Zoom button.
Press 1.
Press 3.
Press 6.
Press 9.
Press 0 for region free (or press desired region number).
Schneider HCS-201
1. Open the player's tray.
2. Press 8, 1, 3, 2, 8 on your remote.
3. A window will appear on your tv.
4. Press the enter key to move to region 9.
5. Press play to close the drawer.
6. The machine is now permanently region free.
Enabling VCD playback:
1. Turn On the player and place a VCD on the open tray
2. Using the front panel press Close quickly followed by Menu and 5 on the remote
3. This should load and play the disc. If the disc fails to play then press 0, 0, 0, 1 and the disc should then play
4. If this fails to work then you may wish to consider using the setup for the Goodmans GDVD-135.
Schneider HCS-500
Open the players drawer
Press Volume Up on your Remote
Press Fast Forward on your Remote
The on screen display will show 321 followed by the current Region code
Press Volume Up on your Remote
Press Fast Forward on your Remote
Repeat steps 5 and 6 until the desired Region code is shown on the display
Press and hold the Angle button on the Remote for approximately five seconds to select the Region
Scott DVD-838
Ensure the player has no disc in the tray
Press Setup
Press Mute
Press Last
Press Next
Sharp DV-550
1. Press Stop
2. Press Setup
3. Press Still/Step
4. Press 1, 2, 3
5. You'll find a "LOOPHOLES" menu (the software politely reminds you that "YOU SHOULDNT BE HERE").
There is a Region menu and Macrovision menu plus others (CSS, AUTOMUTE, AUDIODITHER). Use this setup
with care as you could screw up your machine!