Specifications

Disable Macrovision

1. Press Open, Intro, 0, 7, 1, 2, 1.

2. The onscreen display should read SET OK.

NB: Apparently, there is no Intro button on the remote - could this mean that you need to use another button eg, Index

or something?

Bush DVD-102

Press the Open / Close button on the Remote Control to open the drive tray.

Press the buttons 2, 0, 0 and 1 on the Remote Control.

Press the Enter button on the Remote Control

You will now enter a hidden Setup page, and can change the player to any Region.

To set it to Region Free Enter 13 as the country code.

Bush DVD-2000

Open the DVD Player CD tray.

Place a Region 1 disc in the tray, but don't close it.

Press the buttons 0, 1, 2 and then 3 on your remote control in order, one at a time.

Press the play button on your remote control. To change the player back to Region 2

Open the DVD player CD tray. Place a Region 2 disc in the tray, but don't close it.

Press the buttons Return and then Play on your remote control in order, one at a time.

Bush DVD-2002

Press the Open button on your remote control to open the tray.

Press the 7 button on your remote control.

Press the Enter button on your remote control.

Press the 7 button on your remote control.

You will now enter the hidden setup page, and can change the player to any

Region or set it to Region Free by entering 13 as the country code.

Bush DVH S4

Switch DVD on then press open

Then press 0,5,2,0

Press up

Press down

Press left

Press right

Region free should appear in left corner

Bush DVD-2004

This Player MAY be Region free right out of the box. If it is not, try one of the following methods to make it Multi-

Region:

Press Open on your remote control to open the tray.

Press 7.

Press 7 again..

Press Enter.

You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free by

entering 13 as the country code. You can also disable Macrovision from this menu.

Press Play to exit the menu.

To convert this player to Multi-Region if the above does not work:

Press Open on your remote control to open the drive tray.

Press 2, 0, 0 and 1, in order and one at a time