Specifications

240
Samsung SV-DVD3E
If the any of the setups listed below fail to work then you may want to consider using the other codes listed further
down this page. Remember that the steps may need to be entered quickly and from a cold start.
Always perform a Cold Start before applying this setup:
1. Power on your player
2. Press and hold both the Play and Stop buttons on the players front panel
3. After a short while you should be presented with a set of language options (choose from 1 to 6).
4. Release the Play and Stop buttons on the player.
If this does not work, try this method for cold boot:
1. Power on your player
2. Press and hold both the FF and Pause buttons on the players front panel (or Stop and Pause, if that does not work).
3. After a short while you should be presented with a set of language options (choose from 1 to 6).
4. Release the Play and Stop buttons on the player.
Converting this player to Multi-Region:
1. The player should be powered on, the tray closed without any disc inside.
2. The logo "DVD Video Samsung" visble on screen and the message No Disc must have already appeared.
2. Press Subtitle on the remote - nothing should appear.
3. Using the remote control, Enter in the code for your original region (see setups above):
Region 1 - 2, 9, 3, 3, 4
Region 2 - 3, 8, 7, 6, 7
Region 3 - 5, 6, 7, 3, 2
Region 4 - 7, 6, 8, 8, 4
Region 5 - 5, 3, 8, 1, 4
Region 6 - 2, 4, 4, 6, 2
4. A number should appear - this is the player's region number that was last programmed.
5. Press the number of the region you require, or 9 for region-free.
6. Open the player's tray using the front panel.
7. Press Standby on the remote control.
Samsung SV-DVD6E
If the any of the setups listed below fail to work then you may want to consider using the other codes listed further
down this page. Remember that the steps may need to be entered quickly and from a cold start.
Always perform a Cold Start before applying this setup:
1. Power on your player
2. Press and hold both the Play and Stop buttons on the players front panel
3. After a short while you should be presented with a set of language options (choose from 1 to 6).
4. Release the Play and Stop buttons on the player.
If this does not work, try this method for cold boot:
1. Power on your player
2. Press and hold both the FF and Pause buttons on the players front panel (or Stop and Pause, if that does not work).
3. After a short while you should be presented with a set of language options (choose from 1 to 6).
4. Release the Play and Stop buttons on the player.
Converting this player to Multi-Region:
1. The player should be powered on, the tray closed without any disc inside.
2. The logo "DVD Video Samsung" visble on screen and the message No Disc must have already appeared.