Specifications
231
Further information has emerged for the very latest players. The only drawback with the below is that it isn't held
when the player is switched off. You also need an Aiwa remote control, our for example the Aiwa RC-7AS08:
1. Turn on the player
2, Open the DVD tray
3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen
4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player
5. Put any Region of DVD in and it will play
NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E
firmware loaded. Try the Samsung V-5000 setup, it MAY work.
Converting this player to Multi-Region (older firmware):
If you have:
Firmware version 5.02C (or earlier), or 5.02Ea through 5.02Ed: use REPEAT, 3, 8, 7, 6, 7
Firmware version 5.02Ee (or later): use REPEAT, 5, 7, 5, 3, 8
Firmware version 5.02Da through 5.02E: you can't use this setup until you've upgraded your firmware to version
5.02Ee.
The player may halt on FBI warnings...If the player does freeze at the FBI warnings, Press Forward Search x2 or
faster.
Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded,
firmware update does not remove setup. This setup also removes Macrovision.
Samsung DVD-707
Converting this player to Multi-Region (newer firmware):
1. Press DVD on your remote control.
2. Press Open/Close.
3. Place a Region 1 disc in the tray (or any different region).
4. Press Open/Close.
5. Wait until the player ejects the disc, displaying an error message and leaving the tray open.
6. Remove the Region 1 disc from the tray.
7. Press Open/Close.
8. Wait until the display shows the words 'NO DISC'.
9. Press TV.
10. Press 2, 0, and 0 in order, one at a time.
11. Press Open/Close.
12. Place a Region 1 disc in the tray.
13. Press Open/Close.
Converting this player to Multi-Region (older firmware):
1. Press DVD on your remote control.
2. Press Open/Close.
3. Place a Region 1 disc in the tray (or any different region).
4. Press Open/Close.
5. Wait until the player ejects the disc, displaying an error message and leaving the tray open.
6. Remove the Region 1 disc from the tray.
7. Press Open/Close.
8. Wait until the display shows the words 'NO DISC'.
9. Press Time Search.
10. Press 1, 1, and 9 in order, one at a time.
11. Press Open/Close.
12. Place a Region 1 disc in the tray.
13. Press Open/Close.