Specifications

218
3. Press Sleep on the Aiwa Remote, and you will see a cold start message on screen
4. Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player
5. Put any Region of DVD in and it will play
NB: It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E
firmware loaded. Try the Samsung V-5000 setup, it MAY work.
Converting to Multi-Region if the above options fail:
1. Press Repeat on your remote control
NB: Do not confuse this with the Repeat A-B button.
2. Press 3, 8, 7, 6 and 7, in order one at a time.
3. The numbers 02 will be displayed on the top left of your onscreen display.
4. Press 1 for region 1, 2 for region 2, and so on, or 9 for multi-region playback.
NB: The above step may be time sensitive and need to be performed quickly.
5. Press the Open button on your remote control.
NB: The above step may be time sensitive and need to be performed quickly.
6. After 15 seconds have elapsed, power off your player and then power on your player.
A button-press rate of 1 press per second is recommended. Don't take any notice of the numbers you see on screen -
just press REPEAT, 3, 8, 7, 6, 7 *or* REPEAT, 5, 7, 5, 3, 8 (depending on which firmware version you have) and
only then check to see whether "02" has appeared. You need to open up your player to check which firmware version
you have. If you have older firmware, see below.
Converting this player to Multi-Region (older firmware):
If you have:
Firmware version 5.02C (or earlier), or 5.02Ea through 5.02Ed: use REPEAT, 3, 8, 7, 6, 7
Firmware version 5.02Ee (or later): use REPEAT, 5, 7, 5, 3, 8
Firmware version 5.02Da through 5.02E: you can't use this setup until you've upgraded your firmware to version
5.02Ee.
The player may halt on FBI warnings...If the player does freeze at the FBI warnings, Press Forward Search x2 or
faster.
Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded,
firmware update does not remove setup. This setup also removes Macrovision.
Samsung DVD-M105E
Converting this player to Multi-Region (newer firmware - 5.02E and above):
1. Press Repeat on your Remote Control.
2. Using the Remote enter the code below.
NB1: that you must know what Region your player is currently set to in order to know which code is appropriate:
NB2: for Region 2 use 5, 7, 5, 3, 8 instead of 3, 8, 7, 6, 7. Refer to the table below:
for Region 1 use 2, 9, 3, 3 and 4
for Region 2 use 5, 7, 5, 8 and 8
for Region 3 use 5, 6, 7, 3 and 2
for Region 4 use 7, 6, 8, 8 and 4
for Region 5 use 5, 3, 8, 1 and 4
for Region 6 use 2, 4, 4, 6 and 2
3. A code should be displayed on the screen indicating the current Region setting of your unit
4. Press 9 for Region free, or press 1 for Region 1, 2 for Region 2 and so on
5. Press Open.
6. Press Standby.