Specifications

209
1. Press Setup button on the Remote.
2. Press 1, 2, 3 and then 4.
3. You should now see the firmware version date.
Converting this player to Multi-Region:
1. Press Setup button on the remote.
2. Using the onscreen menu, select the Preferences option.
3. Press Still/Step.
4. Press Prev.
5. Press Next.
6. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free. You
can also disable Macrovision from this menu.
Sampo DVD-360
Check firmware revision:
1. Press Setup button on the Remote.
2. Press 1, 2, 3 and then 4.
3. You should now see the firmware version date.
Converting this player to Multi-Region:
1. Press Setup button on the remote.
2. Using the onscreen menu, select the Preferences option.
3. Press Still/Step.
4. Press Prev.
5. Press Next.
6. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free. You
can also disable Macrovision from this menu.
Sampo DVD-520
Check firmware revision:
1. Press Setup button on the Remote.
2. Press 1, 2, 3 and then 4.
3. You should now see the firmware version date.
Checking for firmware if the above does not work on your system:
1. Press Setup button on the Remote.
2. Press 1, 2, 3, 4 and then 5.
3. You should now see the firmware version date.
Converting this player to Multi-Region:
1. Press Setup button on the remote.
2. Using the onscreen menu, select the Preferences option.
3. Press Still/Step.
4. Press Prev.
5. Press Next.
6. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free. You
can also disable Macrovision from this menu.
Converting this player to Multi-Region if this fails (newer players):
1. Press the Setup on the remote.
2. Press 3, 8, 8, 8, 3 on the remote. IMPORTANT: These numbers must be typed correctly, or the video-out
capability may not work correctly any more!