Specifications
197
3. Advance to the far right-hand tab "Preferences".
4. Enter Code # 1379 then use the "up & down arrows" to change the Region Code.
5. Once code is chosen, press Enter
Polti DVD-101
:
1. Eject the player's tray.
2. Press 1, 4, 5 and 6 on the remote.
3. Press 0 for region free.
Prima EP-DVD 650
Power on the unit and open the DVD door by pressing
the "Open" button on the front panel
Use Remote Control to enter the following numbers 3, 3, 0, 8, 8
You will see in the top left of the screen "****" appear
Key in a number corresponding to the Region you desire your player to be set to, i.e. 1 for Region 1, 2 for Region 2
and so on, use 0 for Region free
If 3, 3, 0, 8, 8 fails try 8, 9, 2, 6
If 0 for Region free fails, try 9
Primare V10
Open the players tray
Press 9, 8 and SELECT (this should take you into the Service Menu)
In the box "region code" insert 14
In the "Macrovision" (this is page 2 of the menu) insert 0
Press SELECT
Press RETURN
Primare V20
Primare V25
Open the players tray
Press 9, 8 and SELECT (this should take you into the Service Menu)
In the box "region code" insert 14
In the "Macrovision" (this is page 2 of the menu) insert 0
Press SELECT
Press RETURN
Prism DV-302
1. Press Open/Close on your remote control to open the drive tray.
2. Press Setup.
3. Using your remote control, highlight but do not select the Exit Setup option in the menu.
4. Press 1, 3, 6 and 9, in order, one at a time.
5. Press Left arrow on your remote control, three times, in succession.
6. Press the Right arrow on your remote control.
7. Select the new Version option from the menu.
8. You will now be able to change the value to 1 for Region 1, 2 for Region 2, and so on, or 0 for multi-region
playback.
note: Once you enter the Version option screen press the right button on the remote this changes the
highlighted region code from green to pink. You can now change the region by using the up and down arrows
to the one you want.
Proline DVD-1040
If you have a disc in the tray, take it out first and THEN turn the power off on the unit;
Turn the power on with the remote control;
Open the tray with the remote control and leave open for the duration of this procedure;