Specifications

196
Pioneer DV-37
Turn on your DVD player without a disc
Press "setup"
Press "right Arrow" until "general" is selected
Press "down arow" once
Press "display"
Press "condition Memory"
Press "1", "2", "3", "4", "5" or "6" for the Regio
Press "setup"
After this the unit is ready to play the selected region
Pioneer DV-505
With no DVD in the tray,
Press MENU,
select INITIAL,
press DISPLAY,
press CONDITION.
Then input the number of the zone you want.
PLU2 DS-6338B
1. Press Setup on the remote control
2. Press 1, 3, 6, 9.
3. Press Left Arrow 3 times, Right Arrow once.
4. Enter 0 for region free (or choose required region number).
PLU2 DS-6338D
Progressive
1. Open the player tray and Press Setup.
2. Choose "Preference Page"
3. Press 1, 3, 7, 9.
4. the region menu entry will be accessible
5. Select the region and press "UP" or "DOWN" to choose the region code you like.
NB: The "preferences page" menu sometimes is only visible if the tray is open. You can find it then with the
following approach: First, open the tray -> press "SETUP" to enter the general setting page -> press left or
right direction buttons three times and the preference page will come out, then you can switch the region code
with the described steps.
Non Progressive
1. Press Open/Close to open the tray.
2. Press Intro.
3. Enter the number sequence 20110 for code free operation, 20111 for region 1 DVDs or 20112 for region 2 DVDs.
4. "SET IS OK" should be displayed on the screen.
PLU2 HI SCAN 128V
1. Ensure the tray is empty and closed.
2. Press 7, 7 on the remote control.
3. Press 0 for region free, (1 for US DVDs, 2 for European DVDs or any other valid region code you like).
3. The player now plays back DVDs with the selected region code
Polaroid PDV-0700
1. Ensure the player tray is empty.
2. Press Setup on the remote.