Specifications
193
If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a
downloadable .pdb file.
1. Download the .pdb file into your Palm Pilot: Palm (V) pdb
(Zip file).
2. Press the OmniRemote key marked as 955 Multizone.
3. The onscreen display should show 11 spaces like this: '-----------'.
4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255. Note that this is 12
digits and the last digit will not show on the on-screen display.
5. Press the Play button on the DVD player's Remote
6. The onscreen display should now show the words No Disc
7. Power off your DVD player, wait 10 seconds and then power back on
You may also use the following methods for players with firmware 6.2:
1. Turn your DVD player on
2. The display will show you no disc
3. Press Play and then press 1, 5, 9 on the DVD Remote
4. On DVD display will appear ------ -----
5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point
6. Press Play
7. The player will be turned off
Your DVD is ready
Converting the player to Multi-Region if the above does not work:
Region 1:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Region 2:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode.
3. Press PLAY on the remote.
Reset to factory defaults:
1. Press PLAY, 1, 5, 9 on the remote control.
2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Philips MX-3600
1. Press the Play button on the player.
2. Press 1, 5 and 9 on the remote.
3. The onscreen display should show spaces like this: '-----------'
4. Press 111 for region 1, or 221 for region 2.
5. Press 0, 0, 1.
6. Press 0, 8.
7. You should now have entered a code in the format XXX-YYY-08 which should be indicated on the onscreen
display.
8. Press Play on the remote control.
To reset the region change counter on this unit to enable another 25 maximum changes:
1. Press the Play button on the player.
2. Using the remote control, key in the following: 1, 5, 9, Play.