Specifications

4. You will see a secret menu, where you can select the region.

5. Select 13 for region free.

NOTE : To turn the Macrovision OFF, perform the same setup as above, find the Macrovision Option and then set it

to '0'. This will disable the Macrovision until the player is switched off.

NB: Macrovision will have to be re-set if the player is powered off.

Ascomtec DVD-3003

1. Open the player's tray.

2. Press Setup on the remote.

3. Press 8, 8, 8, 8.

4. A version menu should appear, allowing you to change the version.

It may not work.

Aspire Digital AD-8000

1. Open players tray.

2. Press Pause on the remote.

3. Press 2, 0, 1, 1.

4. Press 0 for region free.

5. This procedure can be done multiple times without hurting the DVD Player/Recorder.

AST F7

Using the remote:

1. Press 7.

2. Press Setup.

3. Press Pause.

4. Press Prev (<<).

5. Press Next (>>).

6. Press Setup.

A-Trend AD-L528

With the draw closed, and with no disc in it.

Press 7,6 and select on the remote, and this will take you into the firmware settings

Use the arrows on the remote to scroll down to the region setting and change to whatever region you require then

press enter.

Then scroll to the bottom where it says 'next page' and press enter.

On the next page scroll to the macro vision settings and press enter twice or until '0' is shown and the macro vision is

disabled.

Then press set-up to exit. If you turn the machine off, the macrovision will have to be set to disabled again. Or take

any disc out of player, press pause on remote control press 3, 1, 4, 1, 5, 9 on remote control and the word CODE will

appear in the DVD player's window

Press the key for the region e.g., 0 for region free.

Press pause again. Turn player off then on again

Or switch on DVD player, press 'stop' on the remote, press '1','9','9','9' then 'enter' and the zone menu appears select

'all' to de-regionize the player.

A-Trend Helios

1. Open the drive tray.

2. Press Setup on the remote control.

3. Press 1, 9, 9, and 9 with the remote control.

4. Select the REGION option from the hidden menu that appears to change to all regions or a specific region.