Specifications

172
3. The onscreen display should show 11 spaces like this: '-----------'.
4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255. Note that this is 12
digits and the last digit will not show on the on-screen display.
5. Press the Play button on the DVD player's Remote
6. The onscreen display should now show the words No Disc
7. Power off your DVD player, wait 10 seconds and then power back on
You may also use the following methods for players with firmware 6.2:
1. Turn your DVD player on
2. The display will show you no disc
3. Press Play and then press 1, 5, 9 on the DVD Remote
4. On DVD display will appear ------ -----
5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point
6. Press Play
7. The player will be turned off
Your DVD is ready
Converting the player to Multi-Region if the above does not work:
Region 1:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Region 2:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode.
3. Press PLAY on the remote.
Reset to factory defaults:
1. Press PLAY, 1, 5, 9 on the remote control.
2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Philips DVD-825
To convert this player to play a Region 1 disc:
Press Play, 2, 7 and 4 on the Remote Control. The onscreen display should then look like this: '____ ____'.
Enter the following code using the Remote Controls number pad 005000 128 256.
Press the Play button on the Remote Control.
The onscreen display should turn red, indicating that your region settings have been changed.
To convert this player to play a Region 2 disc:
Press Play, 2, 7 and 4 on the Remote Control. The onscreen display should then look like this: '____ ____'.
Enter the following code using the Remote Controls number pad 001000 128 156.
Press the Play button on the Remote Control.
The onscreen display should turn red, indicating that your region settings have been changed.
Philips DVD-865AT
NB: The following setup should work with Firmware 6.2. Failing that, you may wish to try the universal setup
listed above.
1. Turn your DVD player on.
2. The display will show you no disc.