Specifications
170
5. Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point
6. Press Play
7. The player will be turned off
Your DVD is ready
Converting the player to Multi-Region if the above does not work:
Region 1:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 005 000 128 156 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Region 2:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode.
3. Press PLAY on the remote.
Reset to factory defaults:
1. Press PLAY, 1, 5, 9 on the remote control.
2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Philips DVD-751
1. Power on the unit.
2. Press Setup on the remote.
3. Open the tray
4. Press 8, 4, 2 and 1 on the remote.
5. The current zone of the player will be displayed on the screen.
6. Press Select on the remote and zone 9 will be displayed on the screen.
7. Close the tray.
The player should now be region free.
Philips DVD-752
You will need a One-4-All universal remote for this (Send the infra-red code RC6 (aka Codeset 4, Key 235)):
1. Set up the remote with the code 0, 5, 3, 9.
2. Press the MAGIC button.
3. Press 085. The display should read '----'
4. Enter the following with the normal Marantz remote: 222 222 005 255.
5. Press Enter.
6. The player should now be region-free.
To change to a specific region:
1. Set up the remote with the code 0, 5, 3, 9.
2. Press the MAGIC button.
3. Press 085. The display should read '----'
4. Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required.
If you do not have a One-4-All universal remote:
If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a
downloadable .pdb file.
1. Download the .pdb file into your Palm Pilot: Palm (V) pdb
(Zip file).
2. Press the OmniRemote key marked as 955 Multizone.
3. The onscreen display should show 11 spaces like this: '-----------'.