Specifications
155
Region 2:
1. Press PLAY, 2, 7, 4 on the remote control.
2. When the display reads '--', press 002 000 128 156 on the remote control. The player is in region 2 mode.
3. Press PLAY on the remote.
Reset to factory defaults:
1. Press PLAY, 1, 5, 9 on the remote control.
2. When the display reads '--', press 004 010 000 140 on the remote control. The player is in region 1 mode.
3. Press PLAY on the remote.
Philips DVD-625
1. Press 9, 9, 9, 9 on the remote.
2. Press 0 for region free (or press region number required).
Philips DVD-626K
1. Press 9, 9, 9, 9 on the remote.
2. Press 0 for region free (or press region number required).
Philips DVD-634
1. Open the tray.
2. Press 0, 0, 0 and 0 on your remote control.
3. Press 0 for region free or 1 for region 1, 2 for region 2 etc.
4. To check region Open the tray and press Display on the remote.
To check the currently set region on this player:
1. Press Open on player to open the drive tray.
2. Press Display on on the remote control.
3. The second line of the onscreen display should display the word REG followed by the currently set region.
Philips DVD-640
You will need a One-4-All universal remote for this (Send the infra-red code RC6 (aka Codeset 4, Key 235)):
1. Set up the remote with the code 0, 5, 3, 9.
2. Press the MAGIC button.
3. Press 085. The display should read '----'
4. Enter the following with the normal Marantz remote: 222 222 005 255.
5. Press Enter.
6. The player should now be region-free.
To change to a specific region:
1. Set up the remote with the code 0, 5, 3, 9.
2. Press the MAGIC button.
3. Press 085. The display should read '----'
4. Enter the following with the normal Marantz remote: 222 222 005 00, followed by the region number required.
If you do not have a One-4-All universal remote:
If you own a Palm Pilot, you may also use Pacific Neo-Tek's OmniRemote software to generate the RC6 code using a
downloadable .pdb file.
1. Download the .pdb file into your Palm Pilot: Palm (V) pdb
(Zip file).
2. Press the OmniRemote key marked as 955 Multizone.
3. The onscreen display should show 11 spaces like this: '-----------'.
4. Using the number keys on your DVD player's Remote Control, enter the code 222 222 005 255. Note that this is 12