Specifications

147
Insert any disc, select the PBC button on the remote control, then followed by selecting the play button. The PBC
function is for high-level menus and RCE coding.
Panasonic A112, A120, RP56, RV31, RV32, RC-HT80
1. Ensure there is no disc in the tray and that the tray is closed.
2. Press Stop.
3. Press Stop.
4. Press Setup.
5. Press 3, 8, 8, 8 and 3.
6. Press desired region number.
Converting the player to Multi-Region if the above does not work:
1. Email or write to Panasonic service department and ask for the DVD service Disc No.2 all the info is
supplied.
2. It doesn't tell you what it does but the codes turn your player into multiregion.
3. For disabling Macrovision follow the same steps and replace code 3192 to 3193 after you have done the
multiregion upgrade.
4. Note This discs works with the new RA players as well.
Panasonic RV-60
1. Ensure the players tray is empty.
2. Press Action on the remote.
2. Press 1, >=10, 6, 4, 3 and 8.
3. A new menu option will appear followed by 4 stars.
4. Use one of the following codes to:
3192 -> Multi-Region Enable
3193 -> Macrovision Disable
NB: If you locked your player by pressing [4] instead of [1] after pressing [ACTION], this will also unlock your
player.
Panasonic SC-DK2
1. Open the players tray.
2. Press 8, 9, 2 and 6 ("*" will be seen on the screen).
3. Select Region (1 to 6) or "0" for Region free
4. Press Play (the tray will close).
Notes:
If you key in 8, 9, 2, 6, 7 the Firmware version will be shown.
If you key in 8, 9, 2, 6, 7 all settings will be returned to default.
Philco DV-P2000
Ensure there is no disc in the tray and that the tray is closed
Press STOP
Press STOP
Press SETUP
Then key in the following 3, 8, 8, 8, 3
Followed by the Region you wish your player to play
Philco DV-P2100