Specifications

14
Alba DVD-519
1. Remove any Disc.
2. Close tray.
3. Press Setup on Remote .
4. Press Next, Prev, Next, Prev.
5. Ver should appear at the top right.
6. Change to 255 using left and right keys to enable multi-region
7. Turn machine off and on.
There may be the opportunity to change the VER numbers from 3001, 4001 and 5001 to 3000, 4000 and 5000, the
combinations of which can alter VCD enable/disable, macrovision off/on, user prohibitions off/on.
All-Tel DVD-101
1. Open the player's tray.
2. Press 1, 4, 5, 6 (on the remote).
3. Press 0 for region free (or desired region number).
Doesn't seem to work with firmware version ISZ9.48
Amitech AD-702
Press these keys of remote:
1. Indstil.
2. Pause (try STOP if doesn't work).
3. Next.
4. Prev.
5. Set desired region number.
6. You can also change the Macrovision setting within this menu.
Amitech AD-710
Press these keys of remote:
1. Indstil.
2. Pause (try STOP if doesn't work).
3. Next.
4. Prev.
5. Set desired region number.
6. You can also change the Macrovision setting within this menu.
Amoisonic DVD-20
1. Just power on the player, make sure no disc is inserted.
2. Using remote Press : 0, 1, 0, 8, x, Where x = region. (So 01081 is region 1, 01082 is region 2).
3. 01080 is region free !
4. Press Stop 8 times (from remote).
Amoisonic DVD-2000
1. Power on, no disc in the tray.
2. Press Setup on remote control.
3. Press arrow "?" and move to Exit_Setup. do not press any other button such like 'select'.
4. Press "Subtitle", "FB", "FF" on remote control.
5. Choose region or bypass for region free.