Specifications

139
Some new discs use enhanced regional coding which may not work with the "0 for all" setting. In this case use
the specific code for the Region of the disc.
NEC NDV-24
1. Make sure there is no Disc in the unit when you turn it on.
2. Press Pause on the remote.
3. Press 3, 1, 4, 1, 5 and 9 on the remote.
4. The word Code should appear on the screen
5. Press the number for the required region (0 = multi-Region)
6. Press Pause
7. Turn the unit off then back on and you're good to go.
Some new discs use enhanced regional coding which may not work with the "0 for all" setting. In this case use
the specific code for the Region of the disc.
This setup may not work for Australian model NDV-24 players.
NEC NDV-31
1. Make sure there is no Disc in the unit when you turn it on.
2. Press Pause on the remote.
3. Press 3, 1, 4, 1, 5 and 9 on the remote.
4. The word Code should appear on the screen
5. Press the number for the required region (0 = multi-Region)
6. Press Pause
7. Turn the unit off then back on and you're good to go.
Some new discs use enhanced regional coding which may not work with the "0 for all" setting. In this case use
the specific code for the Region of the disc.
NEC NDV-100
1. Make sure there is no Disc in the unit when you turn it on.
2. Press Pause on the remote.
3. Press 3, 1, 4, 1, 5 and 9 on the remote.
4. The word Code should appear on the screen
5. Press the number for the required region (0 = multi-Region)
6. Press Pause
7. Turn the unit off then back on and you're good to go.
Some new discs use enhanced regional coding which may not work with the "0 for all" setting. In this case use
the specific code for the Region of the disc.
Neufunk DT-2000
Press Stop
Press Stop
Press Setup
Press Slow |<<
Then use the left or right arrow to change the Region code of DVD player, or select *
for multi-region mode
Neuston Maestro DVX-1201
1. Power on and ensure the players tray is empty.
2. Press 4, 1, 0, 4, 0 and 7
3. Press 0 for region free (or choose desired region number).
Nextbase DVD-9000