Specifications

138
Nakamichi DVD-10
Connect the machine to the mains but do not power on, also ensure there is no disc inserted
Press and hold down both the Dimmer and Reverse Skip buttons on the front panel and then press the Power ON
The display should show "NAKAMICHI"
Hold the Dimmer & Reverse Skip buttons for a few seconds and the Display should change to "___ ___ ___ ___"
from "NAKAMICHI". Wait for a minimum of 5 seconds (at this stage you're not pushing the Dimmer & Reverse Skip
buttons any longer), then using the handset's numerical keys press 1, 9, 9, 9
The display should now show: A-00 D-02, D-02 indicates Region 2
To change the region code, punch in the new code (i.e. 01 for Region 1, 03 for Region 3, etc.) and after that press the
ENTER button (located next to the numbers keypad on the Handset). The display should now change (slowly) to D-
01 (or whichever new region you have assigned to, as in (i.e.) above
Turn the Power, OFF and the machine is set to the new Region.
Nakamichi SoundSpace 10, 11 & 21
Press and hold the Track Down button on the player
Press the Power On button to turn on your player
Wait until the machine shows "----" on the display
Release the Track Down button on the player
Using the main remote keypad, enter the digits 1, 0, 1 and 1, then press Enter
The machine should now display "D-00" and be region free
NEC NDV-21
1. Make sure there is no Disc in the unit when you turn it on.
2. Press Pause on the remote.
3. Press 3, 1, 4, 1, 5 and 9 on the remote.
4. The word Code should appear on the screen
5. Press the number for the required region (0 = multi-Region)
6. Press Pause
7. Turn the unit off then back on and you're good to go.
Some new discs use enhanced regional coding which may not work with the "0 for all" setting. In this case use
the specific code for the Region of the disc.
NEC NDV-22
1. Make sure there is no Disc in the unit when you turn it on.
2. Press Pause on the remote.
3. Press 3, 1, 4, 1, 5 and 9 on the remote.
4. The word Code should appear on the screen
5. Press the number for the required region (0 = multi-Region)
6. Press Pause
7. Turn the unit off then back on and you're good to go.
Some new discs use enhanced regional coding which may not work with the "0 for all" setting. In this case use
the specific code for the Region of the disc.
NEC NDV-23
1. Make sure there is no Disc in the unit when you turn it on.
2. Press Pause on the remote.
3. Press 3, 1, 4, 1, 5 and 9 on the remote.
4. The word Code should appear on the screen
5. Press the number for the required region (0 = multi-Region)
6. Press Pause
7. Turn the unit off then back on and you're good to go.