Specifications

134
disable these controls.
9. Using the Arrow keys, go to 4001 option: the code to VER 4001 to enable Macrovision, or VER 4000 to disable
this feature.
10. Using the Arrow keys, go to 5001 option: the code to VER 5001 to disable VCD/SVCD playback, or VER 5000
to enable this feature.
Mustek ScanMagic V200
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.
4. Press Next.
5. Press Prev.
6. A code should appear on the onscreen display
7. Using the Arrow buttons on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and
so on, or VER 255 for multi-region playback.
8. Press Setup.
Converting this player to Multi-Region, and Disabling Macrovision, Parental Controls, VCD Playback:
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.
4. Press Next.
5. Press Prev.
6. A code should appear on the onscreen display
7. Using the Arrow keys on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and so
on, or VER 255 for multi-region playback.
8. Using the Arrow keys, go to 3001 option: the code to VER 3001 to enable parental controls, or VER 3000 to
disable these controls.
9. Using the Arrow keys, go to 4001 option: the code to VER 4001 to enable Macrovision, or VER 4000 to disable
this feature.
NB: This player is VCD enabled out of the box.
Mustek ScanMagic V300
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.
4. Press Next.
5. Press Prev.
6. A code should appear on the onscreen display
7. Using the Arrow buttons on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and
so on, or VER 255 for multi-region playback.
8. Press Setup.
Converting this player to Multi-Region, and Disabling Macrovision, Parental Controls, VCD Playback:
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.
4. Press Next.
5. Press Prev.
6. A code should appear on the onscreen display
7. Using the Arrow keys on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and so
on, or VER 255 for multi-region playback.
8. Using the Arrow keys, go to 3001 option: the code to VER 3001 to enable parental controls, or VER 3000 to