Specifications
131
so on, or VER 255 for multi-region playback.
8. Press Setup.
Converting this player to Multi-Region, and Disabling Macrovision, Parental Controls, VCD Playback:
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.
4. Press Next.
5. Press Prev.
6. A code should appear on the onscreen display
7. Using the Arrow keys on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and so
on, or VER 255 for multi-region playback.
8. Using the Arrow keys, go to Parental Controls. the code to VER 3001 to enable parental controls, or VER 3000 to
disable these controls.
9. Using the Arrow keys, go to Macrovision and change the code to VER 4001 to enable Macrovision, or VER 4000
to disable this feature.
10. Using the Arrow keys, go to VCD/SVCD and change the code to VER 5001 to disable VCD/SVCD playback, or
VER 5000 to enable this feature.
11. Press Setup.
12. Press Setup.
Mustek DVD-V562
1. Ensure the players tray is empty and closed.
2. On the Remote control Press Setup.
3. Then On the Players Front Panel.
4. Press Next.
5. Press Stop.
6. Press Pause/Step.
7. Press Prev.
8. Press Next.
9. You should now see a new menu.
10. Go to Select Region and make your choice. Bypass is region free.
Converting the player to Multi-Region if the above fails:
1. Press Setup.
2. Press the volume + and - keys alternating until you see "VER 2" (# is your current Region code).
3. Use the Cursor keys to choose VER 255 (Region free).
4. Press Setup.
Disable Macrovision:
1. Change the VER numbers seen in step 3 above from 3001 to 3000 and 4001 to 4000.
Enable VCD Playback:
1. You may be able to see VER 5001 in the above method. Change this to 5000 to enable VCD.
US Models NOTE: US Models can play PAL and NTCS. Select Auto in the setup menu (accessed via one above
methods) if playing PAL discs on an NTSC TV.
In some cases, there have been some problems with playing DVD's.
Mustek DVD-V56S
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.