Specifications

130
3. Then you will find the menu. It says 'ver x'. x is you Region code. Press PREV until x=255 for Region free mode.
4. Press Setup.
US Models NOTE: US Models can play PAL and NTCS. Select Auto in the setup menu (accessed via one above
methods) if playing PAL discs on an NTSC TV.
Mustek DVD-V560
Converting this player to Multi-Region (newer firmware):
1. Empty Tray.
2. Press Setup on Remote.
3. Press Next.
4. Press Prev.
5. Press Next.
6. Press Prev.
7. On Right Upper Corner will be written Ver#.
8. Press Left or Right to get to number 255 (which is for region free - these version numbers correspond to region
number).
9. Turn Off and On.
Converting this player to Multi-Region (older firmware):
1. Ensure the players tray is empty and closed.
2. On the Remote control Press Setup.
3. Then On the Players Front Panel.
4. Press Next.
5. Press Stop.
6. Press Pause/Step.
7. Press Prev.
8. Press Next.
9. You should now see a new menu.
10. Go to Select Region and make your choice. Bypass is region free.
Converting the player to Multi-Region if the above fails:
1. Press Setup.
2. Press the volume + and - keys alternating until you see "VER #" (# is your current Region code).
3. Use the Cursor keys to choose VER 255 (Region free).
4. Press Setup.
Converting the player to Multi-Region if the above fails:
1. Press Setup.
2. Press Next, Prev, Next, Prev.
3. Then you will find the menu. It says 'ver x'. x is you Region code. Press PREV until x=255 for Region free mode.
4. Press Setup.
In some cases, there have been some problems with playing DVD's.
Mustek DVD-V561
1. Press Setup on your remote control
2. Press Next.
NB: If steps 2 thru 5 have no effect, you may need to press the equivalent buttons on the player itself
3. Press Prev.
4. Press Next.
5. Press Prev.
6. A code should appear on the onscreen display
7. Using the Arrow buttons on the remote, change the code to VER 1 for region 1 playback, VER 2 for region 2, and